Plastic saddle ring random packing is a new type of packing improved on the basis of rectangular saddle ring packing, also known as super rectangular saddle packing. It has a unique design structure, a shape similar to a saddle, a shell-shaped arc surface with serrated edges or corrugated protrusion

acking tower packing failure analysis and treatment methods The packed tower is a mass transfer device that uses the packing in the tower as a gas-liquid contact. It has many advantages such as large flux, high efficiency, low pressure drop, and small liquid holdup. But how should the packed tower b

What is a packing Raschig ring? Industrial Raschig ring packing is the earliest artificial random packing used in industry. The common size range of Raschig rings is relatively large, and the commonly used size is 25mm - 75mm, but there are also special specifications as small as 6mm and as large as

Many friends ask how to calculate the amount of random packing in cooling towers and how to calculate the volume? In the selection of bulk packing for cooling towers, in addition to requiring large specific surface area and gap ratio of the packing, good packing suitability and sufficient mechanical

Storage methods and precautions for ceramic random packing Ceramic random packing are one of the common fillers and are widely used in the fields of chemical industry, environmental protection, etc. Among them, the quality of ceramic fillers is directly related to the treatment effect, and storage

Metal saddle rings are processed by continuous extrusion. Compared with Raschig ring packing of the same material, they have the advantages of large flux, low pressure drop and high efficiency. Compared with ball rings, they have lower resistance, larger flux, higher efficiency, better packing stre

In the field of chemical engineering and environmental protection treatment, choosing the right packing is crucial to improving reaction efficiency and separation effect. As an efficient gas-liquid contact element, the selection and installation process of CPV rosette packing requires careful planni

The tower packing has excellent acid and heat resistance, and can resist the corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid. It can be used in various high and low occasions, and the application range is very wide. It can be used in chemical industr

Chemshun Ceramics Company is a factory specializing in the production of industrial ceramics. As a manufacturer of ceramics packing, the production process of ceramic chemical fillings is shared as follows:1. Prepare raw materials: It is necessary to prepare various raw materials, such as clay, lime

The difference between inert alumina ceramic balls and activated alumina balls 1) Inert alumina ceramic ballsInert alumina ceramic balls are ordinary ceramic balls, used as separators before and after filling the catalyst layer during the reaction. Inert alumina balls are inert and will not react w