How to stick wear resistant linings by expoxy resin glue?

Using expoxy resin glue to stick wear resistant linings on the equipment surface, you have to do these five steps:

1. Repire your equipment. Before stick, you need to insure the surface of equipment is smooth and flat. Otherwise, you have to repire the wear surface until it's smooth and flat.

2. Polishing and rust removal. Check if there is rust or dust on your equipment surface. If the andwer is yes, polishing the surface to remove rust,then using detergent to wash it until your equipment surface is totally clear.

3. Mixing expoxy resin glue. Mixing expoxy resin type A and B in a A:B = 1:1 ratio.

4. Apply expoxy resin glue on the surface of equipment and put wear resistant linings on.

5. Press wear resistant linings until there is no interspace. You can knock the wear resistant ceramic tiles by rubber hammer.
    

Pingxiang chemshun ceramics co.,ltd is a 17-years wear resistant ceramic manufacturer. And we supply various wear resistant linings and high quality&suitable expoxy resin glue with a cost-effective price. Welcome to email us office@chemshun.com or calling us +86-799-6790781, 0086-158-7995-7696 and visit our factory or our website : www.chemshun.com to know more.